Use your Funds+ balance to pay suppliers directly by virtual card or bank transfer. This guide covers when to use each, how to send a payment, and what to expect when paying in another currency or to a supplier outside the US.
Virtual card or bank transfer?
You can pay a supplier from your funds balance two ways: a virtual card or a bank transfer.
Virtual card is the fastest option. We issue a single-use card for the supplier you name, instantly, with no bank details needed. In most cases, it can use client card payments the moment they arrive, even before they settle. If the supplier takes cards, start here.
Bank transfer sends money to the supplier's bank account. You upload the supplier's bank instructions or invoice, we read the details for you to review, and the supplier usually has the money in under 3 business days. Bank transfers use settled funds only; a new client card payment becomes available for them within 2 business days.
| Virtual card | Bank transfer | |
|---|---|---|
| Speed | Instant | Under 3 business days in most cases |
| Funding source | Available now (settled funds), and pending card payments | Available now (settled funds) only |
| What you need | Supplier name | Supplier's payment instructions, and an invoice or contract |
Paying by virtual card
The fastest way to pay a supplier. Each card works once, even for the same supplier.
Watch how it works.
Step by step, with screenshots
-
Choose virtual card
1a. Click Pay a supplier
Open the trip's Funds tab and click Pay a supplier, under your available balance.
1b. Choose Virtual credit card
Select Virtual credit card, then click Continue. We issue a single-use card instantly, and you don't need the supplier's bank details.
-
Find or add the supplier
2a. Find your supplier
Type part of a saved supplier's name and pick them from the list.
2b. Or add a new supplier
Paying someone new? Type their name and choose Add new supplier. They show as a new supplier on this payment.
-
Add a description
Add the traveler and confirmation number so you can find this payment later.
-
Enter the amount
Enter the amount the supplier will charge. If they charge in another currency, choose it from the currency menu. Your available balance shows underneath.
-
Check the details
Review the supplier, description and amount. Each card works once, even if you pay the same supplier again later. If the card uses pending card payments, a gray box shows the split between balance available now and pending card payments.
-
Create the card
6a. Create virtual card
Click Create virtual card.
6b. Share the card details
Your card is ready. Give the details to the supplier or enter them on their payment page. You can see them again in your payment history until the card is used.
Paying by bank transfer
For suppliers that don't take cards. You'll need their bank instructions and an invoice, confirmation or contract. Bank transfers can't be reversed once sent.
Watch how it works.
Step by step, with screenshots
-
Choose bank transfer
1a. Click Pay a supplier
Open the trip's Funds tab and click Pay a supplier.
1b. Choose bank transfer
Select Wire transfer / local payment method, then click Continue.
-
Add the recipient
2a. Add a new recipient
Open the recipient search and choose Add a new recipient.
2b. Name the supplier
Give them a name you'll recognize under Save as, and check that Recipient country is the country of their bank.
-
Copy the bank numbers
Copy the routing and account numbers from the supplier's bank instructions. Make sure the routing number is for ACH: some banks, like Bank of America, use a different routing number for wires.
-
Add the account details
4a. Add the account details
Choose Business or Individual, then add the name on the account and an email for payment confirmations.
4b. Confirm and continue
Double-check everything against the instructions, tick I confirm that the information matches the latest supplier instructions, then click Continue.
-
Upload two documents
Upload the supplier's bank instructions under Supplier document, and an invoice, confirmation or contract for this payment under Supplier contract.
-
Enter the amount and purpose
Enter the amount under Send to supplier and a Purpose of payment. Add a Memo if you want an internal note.
-
Review and send
7a. Review everything
Check the recipient, bank details, documents and payment. Use Edit to jump back to any section.
7b. Confirm and send
Bank transfers can't be reversed once sent, so take one more look. Tick I confirm these details are correct, then click Send.
7c. Transfer requested
You'll get an email when it's on the way, and you can track it on your Funds page. Next time, this supplier will be saved.
Paying a supplier again
Suppliers you've paid before are saved, so paying them again takes a few clicks.
Watch how it works.
Step by step, with screenshots
-
Choose bank transfer
Select Wire transfer / local payment method, then click Continue.
-
Search saved recipients
Type the supplier's name and pick them from the list. Each saved recipient shows its country, the last four digits of the account and when you last paid them.
-
Check the saved details
3a. Check the saved details
Their bank and recipient details are already filled in. Give them a quick check and update anything that's changed.
3b. Confirm and continue
Tick I confirm that the information matches the latest supplier instructions, then click Continue.
-
Replace the invoice
Your last payment's documents carry over. Use Replace to add the invoice or confirmation for this payment.
-
Enter the amount and purpose
Enter the amount under Send to supplier and a Purpose of payment. Add a Memo if you want an internal note.
-
Review and send
6a. Review and send
Check the details, tick I confirm these details are correct, then click Send. Payments can't be reversed once sent.
6b. Transfer requested
You'll get an email when it's on the way, and you can track it on your Funds page.
If a supplier emails you new bank details, confirm by phone with someone you already know there before paying. Bank transfers can't be reversed.
Paying international suppliers
Same steps as at home. The bank fields and currency follow the supplier's country; we show the estimated USD cost, buffer included, and any unused buffer comes back to your balance.
Watch how it works: pay an international supplier by bank transfer.
Watch how it works: pay an international supplier by virtual card.
Step by step, with screenshots: bank transfer
-
Add a new recipient
1a. Choose bank transfer
Select Wire transfer / local payment method, then click Continue. This example pays a hotel in Italy in euros; the same steps work for any supported country and currency.
1b. Add a new recipient
Choose Add a new recipient, give them a name you'll recognize, and pick the country of their bank under Recipient country.
-
Enter the bank details
2a. The bank fields follow the country
The details you need depend on the country of the supplier's bank, and the form shows only the fields that country uses. If a field appears, it's required.
2b. Copy the details carefully
Account numbers and bank codes are easy to mistype, so copy each one exactly from the supplier's bank instructions.
-
Add the business details
Add the name on the account and an email, tick I confirm that the information matches the latest supplier instructions, then click Continue.
-
Upload two documents
Upload the supplier's bank instructions under Supplier document, and an invoice, confirmation or contract for this payment under Supplier contract.
-
Enter the invoice amount
5a. Enter the invoice amount
Enter the amount you're paying, in the supplier's currency. That's exactly what the supplier receives. The currency starts from the country of the supplier's bank.
5b. Only supported currencies
The currency menu lists only the currencies we can send to that country.
5c. Pay in local currency when you can
You can send US dollars to some countries outside the US, but it can take longer and cost more in fees.
-
Check the estimate in USD
6a. Check the estimate in USD
Below the amount is the estimate we'll take from your Funds+ balance, in US dollars: today's rate plus a small buffer, in case the rate moves before the transfer goes out. Hover Estimated to see the rate.
6b. Watch for Insufficient funds
If the estimate is more than your available balance, you'll see Insufficient funds. Lower the amount, or wait for more client funds to come in.
-
Review and send
7a. Review and send
Check Estimated FX and Debited from Funds account, the amount held from your balance. Tick the confirmation, then click Send.
7b. Transfer requested
Most international transfers arrive in under 3 business days. Once it completes at the actual rate, any unused buffer comes back to your Funds+ balance automatically.
Step by step, with screenshots: virtual card
-
Choose virtual card
Select Virtual credit card, then click Continue. If a supplier outside the US takes cards, it's the fastest way to pay them. This example pays a villa in Italy in euros; the same steps work for other currencies.
-
Supplier and description
2a. Pick the supplier
Type part of the supplier's name and pick them from the list. Paying someone new? Choose Add new supplier.
2b. Add a description
Add the traveler and confirmation number so you can find this payment later.
-
Currency and amount
3a. Choose the currency
Open the currency menu under Charged by supplier and pick the currency the supplier will charge in. You can choose from a long list of currencies.
3b. Enter the amount
Enter the amount the supplier will charge, in their currency.
-
The estimate in dollars
Under You pay from your funds is the estimated amount in US dollars. Your funds are set aside in dollars, and the supplier charges the card in their currency. Hover Estimated to see the rate.
-
Review
Check Estimated FX and Debited from Funds account. A small buffer is already built into the estimate, and anything left over is returned to your Funds+ balance.
-
Create the card
6a. Create virtual card
Click Create virtual card.
6b. Share the card details
Your card is ready. Share the details with the supplier or enter them on their payment page. Each card works only once.
Common questions
Why was more deducted than the invoice?
We apply a buffer to account for possible rate fluctuations, which means the deducted USD amount may be higher than what you see. Once the bank transfer is complete, the unused amount is returned to your Funds account.
Why can't I send the full amount in my balance?
There are usually two reasons. Part of your balance may still be pending, since new client card payments take up to 2 business days to settle before they can go toward a bank transfer. Or, if you're paying in another currency, the estimate plus the buffer may come to a little more than what is available. You can lower the amount, or wait for pending payments to settle and try again.
Why can't I choose USD?
Some countries only accept payments in their local currency, so USD isn't an option for suppliers there. Enter the amount in the supplier's currency instead, and we'll show you the estimated USD amount that will come out of your balance.
What if the supplier hasn't received it?
Most bank transfers arrive in under 3 business days, though some take longer depending on the supplier's bank and country. If it's been a while, share the payment reference from your Funds page with the supplier so their bank can trace it. Still stuck? Reach out and we'll help track it down.
What if the exchange rate moves more than the buffer?
Most exchange rate fluctuations should be accounted for in the buffer. On the rare occasion that exchange rates fluctuate more than the buffer, the transfer is cancelled before any money is sent. Just send it again and you'll see a new estimate at the current rate.
How big is the buffer?
It's a small percentage, typically 5%, added on top of the current exchange rate to cover any movement before your transfer goes out.
What happens to money left on a virtual card?
Any unused money comes back to your balance, whether the supplier charges less than the card amount, issues a refund, or you cancel the card. If you have pending funds used before they settle, it covers those first, and only the rest goes to available now. This applies to any virtual card. If you cancel, the confirm screen shows the split first. See Funds+ in TravelJoy.
How much can I put on a virtual card?
Up to your Available for virtual cards: available now plus pending card payments you haven't used yet. To see it, click Other usable funds under Available now on your funds page. Client bank (ACH) payments count once they settle.
How long is a virtual card good for?
Your card details stay in your payment history until the card is used, so you can pull them up anytime you need to share them with the supplier.
What if a supplier rejects or returns a bank transfer?
Occasionally a bank transfer is returned, for example when the bank details don't match the supplier's account. When that happens, the money goes back to your available balance when we receive it so you can double-check the details and send it again.
Why do I need to upload an invoice or contract?
Because Funds+ holds your clients' money, each bank transfer needs to be tied to a trip. An invoice, confirmation or contract from the supplier shows what the payment is for and keeps a clear record for you and your clients.
Can I pay myself back for a supplier I paid with my own card?
Yes. If you paid a supplier out of pocket for a client's trip, you can still reimburse yourself from client funds. You will need to provide a receipt, not a contract or invoice, from the supplier indicating a payment has been made in the correct amount.
What does a bank transfer cost?
Less than before. TravelJoy passes on the cost associated with bank transfers. With Funds+, bank transfer fees are about 75% lower on average. That's roughly 2% of the payment amount that stays in your business, or about $200 on a $10,000 payment.
Questions? Reply to any of our emails or write to hello@traveljoy.com.
Comments
0 comments
Please sign in to leave a comment.